Conductix-Wampfler Jay Electronique Jump, Инструкция по установке и эксплуатации для пользователя

Страница: 62 / 81

- 62 -
Jump - 332970E_A005
04/03/21
FR EN
6.3- Indicator light functions
The
Jump
repeater has indicator lights with functions and messages
defined according to product version :
6.3.1- Jump «Fixed power supply» version
A
B
LD5
CONFIG
ERROR
CONFIGURATION
TENS UNITS
LD2
LD3
LD4
LED Color Function State Description
LD2
GREEN
Radio signal
reception
Off No radio signal received or reception of incorrect frames
On steady Radio signal reception with correct frames
Flashing Low radio signal reception rate with correct frames
LD3
RED
Jump repeater
startup
Off Repeater does not start up
On steady Jump repeater is in normal operation
LD2 +
LD3
GREEN +
RED
During the learning
transmitter identity
code procedure
Synchronized
continuous flashes
The repeater is waiting for a radio signal from the
transmitter to «learn» the identity code
Flashes alternately The identity code is «learned»
LD4
YELLOW
Information
concerning Jump
repeater power
supply
Off No external power supply on M12 connector
On steady External power supply present on M12 connector
LD5
RED
Radio channel
configuration error
Off No configuration error
On steady Radio channel configuration error detected
flashing
The repeater is configured with the radio operating
mode nb 2 (reception radio channel is different from
transmission radio channel)