Conductix-Wampfler Jay Electronique Jump, Инструкция по установке и эксплуатации для пользователя

Страница: 53 / 81

Jump - 332970E_A005
04/03/21
- 53 -
FR EN
4.2.3- Configuration of radio transmit power
The Jump repeater can be configured for different radio transmit
power levels.
The radio transmit power setting is defined by the user and is chosen
to limit or adapt the range in accordance with the application and the
desired endurance. It must respect the laws in force in the country
where used.
The average range in open space depends on the environment
conditions, the position of the antenna and the orientation of the
components of the radio remote control system.
The power level is adjusted using the « configuration » DIPswitch, with
cursors No. 1, 2 and 3.
Cursor position table :
Cursor
nb. 1
Cursor
nb. 2
Cursor
nb. 3
Level
Corresponding power level
433 MHz Band 915 MHz Band
920MHz
Channel 1 to
15
Channel 16
to 31
ON ON OFF 1 <1mW / -5dBm -12dBm -10dBm -15dBm
OFF ON OFF
2
≈1mW / 0dBm -8dBm 0dBm -10dBm
ON OFF OFF 3 3,16mW / 5dBm -5dBm 7dBm -5dBm
OFF OFF OFF 4 10mW / 10dBm -2dBm 13dBm 0dBm
A B
LD1
LD5
CHARGE
ERROR
CONFIG
ERROR
CONFIGURATION
TENS UNITS
LD2
LD3
LD4
Jump
(«Battery» version shown)
1
ON
2 3
CONFIGURATION
«ON»
position
«OFF»
Position
cursor