Concoa IntelliSwitch 57 Series, Инструкция по техническому обслуживанию

Страница: 16 / 52

16
Test 11 – Offset Values
These numbers (factory set) are used to calibrate the left and
right inlet pressures.
Test 12 – Calibration Values
These numbers are used to calibrate the inlet channels at zero
PSI.
Test 13 – Test Left Inlet Valve
This test turns ON the left inlet valve allowing gas to flow
from that side while turning OFF the right inlet valve.
Test 14 – Test Right Inlet Valve
This test turns ON the right inlet valve allowing gas to flow
from that side while turning OFF the left inlet valve.
Test 15 – Test Left Delivery Regulator
This test turns ON the left delivery regulator while turning
OFF the right delivery regulator.