13
Using the pin assignments shown in Table 1 and the connector views in Figure 6 and Figure 7, solder the wires to the appropriate pins.
After soldering is complete, slide the locking nut over the connector body. Snap the cable retainer into the body and then slide the
protective cover over the cable retainer.
Table 1— Remote Alarm Pin Assignments
Medical IntelliSwitch™
Pin Number
529-5136 Alarm
Pin Number
Function
1
1
Left Inlet Alarm
2
2
Delivery Regulator Alarm.
3
3
+12v (provided by the remote alarm)
4
4
Right Inlet Alarm Status
5
5
Auxiliary Gas Supply Alarm.
6
6
Ground (provided by the remote alarm)
Wire terminations to the Alarm side of the cable are done in the same fashion as the Medical IntelliSwitch™ connector.
Slide the protective cover, cable retainer, and locking nut over the end of the cable as shown in Figure 6.
Figure 8
Using the pin assignments shown in Table 1 and the connector views in Figure 6 and Figure 8, solder the wires to the
appropriate pins. After soldering is complete, slide the locking nut over the connector body. Snap the cable retainer into
the body and then slide the protective cover over the cable retainer.
Содержание IntelliSwitch 57 Series
