EN
26
RO 3107, RO 3109, RO 3111
PRODUCT DESCRIPTION
1. Radiator sections
2. Carrying handle
3. Thermostat regulator
4. Mode selector
5. Supply cable holder
6. Wheels
• Do not use the unit if it does not operate properly, if it has been dropped, damaged or exposed to any liquids. Take
the unit to an authorized service center for testing and repair.
• The unit is not designed for outdoor use.
• The unit is suitable for domestic use only. It is not designed for commercial operation.
• Do not touch the unit with wet or damp hands.
•
Do not immerse the power cord, plug, or appliance into water or any other liquid.
•
The unit shall not be mounted on the wall.
•
The unit shall not be used in any means of transport.
• Do not repair the appliance yourself. Contact an authorized service center.
Failure to follow the manufacturer‘s instructions may cause refusal of warranty repair.
ASSEMBLY
It is necessary to fix the wheels on the bottom side prior to the first use.
The unit shall not be used without properly installed wheels.
1. Place the unit on a stable surface (desk or floor).
Check to make sure that the unit is undamaged, e.g. by fall or transport.
Do not use a damaged unit.
2. Screw the wheels in the bottom strips, and lace the curved end of the yoke in the opening in each strip (Fig. 1).
3. Mount the set onto the bottom part of the unit (Figs. 2, 3).
4. Fasten the yoke using a winged nut (Fig. 4) in order to stabilize the unit and prevent it from turning over.
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliances by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
32
EN
RO 3207 | RO 3209 | RO 3211
1
2
3
4
5
6
EN
26
RO 3107, RO 3109, RO 3111
PRODUCT DESCRIPTION
1. Radiator sections
2. Carrying handle
3. Thermostat regulator
4. Mode selector
5. Supply cable holder
6. Wheels
• Do not use the unit if it does not operate properly, if it has been dropped, damaged or exposed to any liquids. Take
the unit to an authorized service center for testing and repair.
• The unit is not designed for outdoor use.
• The unit is suitable for domestic use only. It is not designed for commercial operation.
• Do not touch the unit with wet or damp hands.
•
Do not immerse the power cord, plug, or appliance into water or any other liquid.
•
The unit shall not be mounted on the wall.
•
The unit shall not be used in any means of transport.
• Do not repair the appliance yourself. Contact an authorized service center.
Failure to follow the manufacturer‘s instructions may cause refusal of warranty repair.
ASSEMBLY
It is necessary to fix the wheels on the bottom side prior to the first use.
The unit shall not be used without properly installed wheels.
1. Place the unit on a stable surface (desk or floor).
Check to make sure that the unit is undamaged, e.g. by fall or transport.
Do not use a damaged unit.
2. Screw the wheels in the bottom strips, and lace the curved end of the yoke in the opening in each strip (Fig. 1).
3. Mount the set onto the bottom part of the unit (Figs. 2, 3).
4. Fasten the yoke using a winged nut (Fig. 4) in order to stabilize the unit and prevent it from turning over.
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliances by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
2
4
3
5
6
1
27
RO 3107, RO 3109, RO 3111
OPERATING INSTRUCTIONS
1. Place the unit on a stable surface or floor to avoid tipping over.
2. Uncoil the supply cable.
3. Connect the power cord plug to the wall outlet.
4. Select the required function using the mode selector (Fig. 5)
5. You may set the required temperature in the room using the thermostat regulator. When heating function
1, 2
, or
3
is
selected, the unit will alternately switch on and off, thus keeping the required temperature.
Note:
More accurate temperature can be set as follows:
Set the thermostat to maximum, and switch the heating to
1, 2
, or
3
. When the required temperature is reached in the
room, turn the thermostat slowly to a lower temperature, until the unit switches off.
6. After use, move the mode selector to the
0
position and unplug the unit from the mains.
NOTE
When turning the unit on for the first time or after prolonged downtime, the unit may release a slight smell. This smell
will vanish after a short time.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
3 Mode selector
RO 3207
RO 3209
RO 3211
0 –
Off.
0 W
0 W
0 W
1 =
low heat
600 W
800 W
1000 W
2 =
medium heat
900 W
1200 W
1300 W
3 =
full heating capacity
1500 W
2000 W
2300 W
CLEANING AND MAINTENANCE
WARNING!
Before cleaning the unit, always disconnect the power cord from the wall outlet!
Prior to handling, make sure the unit has cooled down!
The surface of the unit may only be cleaned using a wet cloth. Do not use any detergents or hard objects, as they may
damage the unit’s surface!
Dust accumulated in the unit may be blown out or removed by a vacuum cleaner.
Never clean the unit under running water, do not rinse it, and do not submerge it in water!
Fig. 5
33
EN
RO 3207 | RO 3209 | RO 3211
EN
26
RO 3107, RO 3109, RO 3111
PRODUCT DESCRIPTION
1. Radiator sections
2. Carrying handle
3. Thermostat regulator
4. Mode selector
5. Supply cable holder
6. Wheels
• Do not use the unit if it does not operate properly, if it has been dropped, damaged or exposed to any liquids. Take
the unit to an authorized service center for testing and repair.
• The unit is not designed for outdoor use.
• The unit is suitable for domestic use only. It is not designed for commercial operation.
• Do not touch the unit with wet or damp hands.
•
Do not immerse the power cord, plug, or appliance into water or any other liquid.
•
The unit shall not be mounted on the wall.
•
The unit shall not be used in any means of transport.
• Do not repair the appliance yourself. Contact an authorized service center.
Failure to follow the manufacturer‘s instructions may cause refusal of warranty repair.
ASSEMBLY
It is necessary to fix the wheels on the bottom side prior to the first use.
The unit shall not be used without properly installed wheels.
1. Place the unit on a stable surface (desk or floor).
Check to make sure that the unit is undamaged, e.g. by fall or transport.
Do not use a damaged unit.
2. Screw the wheels in the bottom strips, and lace the curved end of the yoke in the opening in each strip (Fig. 1).
3. Mount the set onto the bottom part of the unit (Figs. 2, 3).
4. Fasten the yoke using a winged nut (Fig. 4) in order to stabilize the unit and prevent it from turning over.
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliances by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
32
EN
RO 3207 | RO 3209 | RO 3211
1
2
3
4
5
6
EN
26
RO 3107, RO 3109, RO 3111
PRODUCT DESCRIPTION
1. Radiator sections
2. Carrying handle
3. Thermostat regulator
4. Mode selector
5. Supply cable holder
6. Wheels
• Do not use the unit if it does not operate properly, if it has been dropped, damaged or exposed to any liquids. Take
the unit to an authorized service center for testing and repair.
• The unit is not designed for outdoor use.
• The unit is suitable for domestic use only. It is not designed for commercial operation.
• Do not touch the unit with wet or damp hands.
•
Do not immerse the power cord, plug, or appliance into water or any other liquid.
•
The unit shall not be mounted on the wall.
•
The unit shall not be used in any means of transport.
• Do not repair the appliance yourself. Contact an authorized service center.
Failure to follow the manufacturer‘s instructions may cause refusal of warranty repair.
ASSEMBLY
It is necessary to fix the wheels on the bottom side prior to the first use.
The unit shall not be used without properly installed wheels.
1. Place the unit on a stable surface (desk or floor).
Check to make sure that the unit is undamaged, e.g. by fall or transport.
Do not use a damaged unit.
2. Screw the wheels in the bottom strips, and lace the curved end of the yoke in the opening in each strip (Fig. 1).
3. Mount the set onto the bottom part of the unit (Figs. 2, 3).
4. Fasten the yoke using a winged nut (Fig. 4) in order to stabilize the unit and prevent it from turning over.
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliances by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
32
EN
RO 3207 | RO 3209 | RO 3211
1
2
3
4
5
6
1
2
3
5
6
4
1.
Place the unit on a stable surface (desk or floor).
Check to make sure that the unit is undamaged, e.g. by fall or transport.
Do not use a damaged unit.
2.
Place the slide assemblies on the chassis rails of the appliance and tighten them with wing
nuts so that the appliance is stable and there is no risk of it overturning.
Fig. 2
(Fig. 2)
RO3307
RO3309
RO3311
EN
EN
57
56
RO3307 | RO3309 | RO3311
RO3307 | RO3309 | RO3311
