
44
PDV 7360, 7377
EN
• To ensure the correct function of the unit, place it in suitable furniture.
• The unit shall be installed in standardized kitchen furniture designed for built-in appliances or in properly adapted
furniture of the dimensions indicated below.
• The kitchen furniture must be made of sufficiently heat-resistant material. The materials and adhesives used must be
resistant to heating of the unit according to standard ČSN EN 60335-2-6. Materials and adhesives that do not meet
the stated standard may deform or loosen.
• The back wall behind the appliance must be made of heat-resistant material (up to 120°C min.).
• The appliance should not be installed close to a kitchen cabinet made of flammable materials and overreaching the
countertop.
Gas supply connection
• Only authorized personnel can install the connection!
• The gas supply installation must comply with the ČSN 38 6441 and ČSN 38 6460 standards.
• Prior to installation, the user has to have a gas company’s authorization for the connection.
• For propane gas the installation must comply with the ČSN 38 6460 standard.
• Check to make sure that the gas supply matches the values marked on the rating plate.
• The gas piping should be fitted to the terminal connection using the GJ ½” (A) nut. Use the sealing washer (B) and the
pipe elbow (C) to facilitate the connection to the fixed metal piping or the hose (Fig. 6).
Fig. 6
Fig. 5