Concept Pro VXM4-16, Руководство пользователя

Страница: 21 / 52

18
CONFIGURING THE VXM4
CONFIGURING THE VXM4
AREA SETUP: Choosing this option allows the operator to define which areas of the image are monitored
for motion detection.
Light blue grid squares represent detection areas, grey grid squares are ignored. The area on the right
shows that motion will be detected across the entire image
To quickly select or deselect the entire grid, press RETURN to bring up the motion menu.
Highlight SELECT ALL or DESELECT ALL as appropriate and press ENTER
To select or deselect specific areas, press
ENTER
to bring up the green cursor square in the top left of
the display.
Move the cursor using the CURSOR KEYS to the first corner of the area to be set and press ENTER –
the cursor turns orange
Press
ENTER
to change from selected to deselected (or vice versa). Repeat the above sequence as
necessary to mask off or include other areas of the image.
Once the detection area has been defined, press
RETURN
and choose SAVE & EXIT to save the area
and return to the motion setup menu
Please note: a motion detection recording
schedule must be defined in the RECORD
MENU described on page 25
Use the CURSOR KEYS to increase the size of the motion cursor as required.