Concept Pro VXM4-16, Руководство пользователя

Страница: 23 / 52

20
CONFIGURING THE VXM4
CONFIGURING THE VXM4
SYSTEM
To setup the various system options, highlight SYSTEM and press
ENTER
DATE TIME: Allows the operator to set or modify the current date & time
DATE FORMAT: Determines how the date is displayed
TIME FORMAT: Determines how the time is displayed
NETWORK TIME SERVER SETUP: If the VXM4 is connected to the Internet, the time and date can be
accurately set by selecting SYNC and pressing
ENTER
TIME ZONE SETUP: should be set according to the region that the VXM4 is used in.
D.S.T.: When set to ON, the VXM4 will automatically adjust the time by one hour on the relevant date in
spring and autumn
DHCP: When enabled, the VXM4 will obtain an IP address automatically if connected to a DHCP server
or router
DDNS: When enabled, the VXM4 can be accessed through a Dynamic DNS server. Commonly used if a
broadband connection does not have a static IP address
WEB SERVICE: When enabled, allows remote connections using Internet Explorer or other web
browsers.
IP ADDRESS: If DHCP is not being used, the IP address can be manually set
GATEWAY: If DHCP is not being used, the gateway IP address can be manually set
SUBNET MASK: If DHCP is not being used, the subnet mask can be manually set
1ST DNS SERVER: If DHCP is not being used, the first DNS server can be manually set
2ND DNS SERVER: If DHCP is not being used, the second DNS server can be manually set
DDNS SERVER: If DDNS is enabled, the host DDNS server is specified here
NET CLIENT PORT: The port number that the VXM4 uses to support remote connection from the client
software
WEB SERVER PORT: The port number that the VXM4 uses to support remote connection from Internet
Explorer or other web browsers
MAX TX SPEED: Specifies the maximum bandwidth that the VXM4 can use during a remote connection.
SYSTEM: NETWORK
SYSTEM: DATE/TIME
Please note: If any network settings
are modified, the VXM4 will need to
be restarted for changes to take
effect
Please note:
for further information
on network settings and remote
connections please refer to page 29
& page 41