Concept Pro VXM4-16, Руководство пользователя

Страница: 26 / 52

23
CONFIGURING THE VXM4
CONFIGURING THE VXM4
EVENT / SENSOR
To setup the various event handling options, highlight EVENT/SENSOR and press
ENTER
EVENT / SENSOR: HDD EVENT
The VXM4 can monitor the hard drives and detect problems that may be developing.
DRIVE: Selects which hard drive to configure for monitoring.
SMART ALARM: Enables SMART disk monitoring.
CHECK INTERVAL: Can be adjusted as desired
EVENT / SENSOR: ALARM INPUT
Determines the behaviour of each of the 16 alarm inputs.
OPERATION: Alarm inputs can be enabled or disabled
TYPE: Alarm inputs can be set as normally open or normally closed
EVENT / SENSOR: ALARM OUT
Determines the behaviour and actions that will trigger each of the 16 alarm outputs.
Behaviour settings
CHANNEL: Choose which alarm output to configure
OPERATION: The selected alarm output can be enabled or disabled
MODE: Can be either TRANSPARENT (the output is active only when the trigger criteria is present) or
LATCHED (the output is active for a set period of time after a trigger)
DURATION: In LATCHED mode, the time that the alarm output remains active after it has been triggered
TYPE: Can be set to high (0V to +5V when activated) or low (+5V to 0V when activated)
HDD EVENT: Determines whether a hard drive event triggers the alarm output
Action settings
ALARM: Determines whether alarm inputs will trigger the alarm output
VIDEO LOSS: Determines whether video loss on any of the selected channels will trigger the alarm
output
MOTION: Determines whether motion detection on any of the selected channels will trigger the alarm
output
Remember to select APPLY and
press
ENTER to save all settings
before exiting these menus