Concept Pro VXM4-16, Руководство пользователя

Страница: 15 / 52

12
TELEMETRY CONTROL
TELEMETRY CONTROL
Speed domes and other telemetry devices connected to the VXM4, can be fully controlled from
the front panel.
In live display mode, press the
PTZ
button. To select a camera to control, use the
CHANNEL
SELECTION buttons.
Pan and tilt movement is controlled by the CURSOR KEYS , zoom is controlled by turning the
SHUTTLE WHEEL .
tt
&
t
controls focus,
u
&
uu
controls the iris
Press DISPLAY or SEQ buttons to decrease or increase the preset number.
Press PAUSE to program the preset, or ENTER to call an existing preset.
Press RETURN to exit PTZ mode and return to live view.
KEY LOCK FUNCTION
KEY LOCK FUNCTION
An operator with ADMIN rights can choose to lock the VXM4 front
panel to prevent any unauthorised control.
Press the
LOCK
button, enter the default password ‘1234’ and
press ENTER . All buttons are now disabled. To unlock, press the
LOCK
button again and enter the default password ‘1234’
SHUT DOWN
SHUT DOWN
SEQUENCE
SEQUENCE
PANIC RECORDING
PANIC RECORDING
Panic recording will override all standard recording settings to
provide, by default, continuous recording on all channels.
Press the
PANIC button. The top right of the display shows a red
square only to indicate that the VXM4 is in panic recording mode.
Press the
PANIC button again to return to normal recording mode.
Press the
SEQ
button. Each channel is shown in full screen for a
set period of time (default 3 seconds) before switching to the next
channel. To stop the sequence on a particular channel, press the
SEQ button again.
More complex sequences can be programmed through the setup
menu (page 14)
Only an operator with ADMIN rights can shut down the VXM4.
Press the
POWER button, enter the default password ‘1234’ and
press ENTER .
The VXM4 shuts down and emits two beeps to indicate that power
can be safely removed.