Concept Pro VXM4-16, Руководство пользователя

Страница: 17 / 52

14
CONFIGURING THE VXM4
CONFIGURING THE VXM4
DISPLAY: MONITOR
SEQUENCE DWELL: The time that each screen is displayed in a sequence operation
SPOT-OUT DWELL: The time that each screen is displayed on the spot monitor outputs
DE-INTERLACE MODE: When recording any channels in D1 resolution (704 x 576) this should be set to
ON to prevent judder during playback
ALARM POP-UP MODE: When set to ON, an alarm input will cause the associated channel to display full
screen
ALARM POP-UP DWELL: Determines how long the full screen popup is displayed after an alarm input. If
the alarm condition continues, the popup screen is displayed constantly
MOTION POP-UP MODE: When set to ON, motion detection will cause the associated channel to display
full screen
MOTION POP-UP DWELL: Determines how long the full screen popup is displayed after motion detection.
If motion continues, the popup screen is displayed constantly
DISPLAY MODE: The VXM4 output can be optimised for display on a VGA or AV (CRT) monitor
To change any of these settings, highlight MONITOR and press
ENTER
to select. Use the
CURSOR KEYS
to navigate to the option required. Press ENTER to select the option (the cursor changes to orange) and
use the
CURSOR KEYS
to change the setting. Press
ENTER
to save the setting or
RETURN
to cancel.
Please note: When display modes
are changed, the VXM4 must be
shutdown and restarted for
changes to take effect
DISPLAY: SEQUENCE
When the SEQ button is pressed, the default sequence will cycle through all 16 channels, one by one.
Sequence setup allows the operator to define a custom sequence using mixed multi screen views and
any desired channels.
To add a new sequence, highlight ADD and press
ENTER
Sequence title is highlighted – press
ENTER
to bring up the virtual keyboard and key in a name or
reference number for the new sequence.
Move around the virtual keyboard using the CURSOR KEYS and ENTER to select a character.
To delete a character, use
ç
To change keyboard case and access symbols, use
é
To exit, press RETURN