manualshive.com logo in svg

Comtrol InterChange VS 3000 Series, Руководство по установке и настройке

Поделиться
Скачать
Comtrol InterChange VS 3000 Series Скачать руководство пользователя страница 65

65

Error Codes and System Messages

CAPI3000 E011: 

Registration of virtual server #n failed, reason <0xhh>!

Registration of VS3000 ISDN driver with the CAPI 
Manager failed. Fatal, since driver initialization fails. 
If reason = 1001, too many applications.
If reason = 1002, invalid block size.
If reason = 1003, invalid buffer size.
If reason = 1004, invalid message buffer.
If reason = 1005, invalid connect number.
If reason = 1006, busy.
If reason = 1007, OS resource error.
If reason = 1008, CAPI not installed.
If reason = 1009, no external equipment.
If reason = 100A, no internal equipment.
If reason = 100B, invalid signal type.
If reason = 10F0, too many applications.
If reason = 10F1, invalid function array.
If reason = 10F2, invalid controller information.
No other reason codes are defined.

CAPI3000 E012:

All n possible InterChangeVS 3000 virtual servers 
already installed!

Maximum number of VS3000 units have been attached to 
and configured for this server. Check server configuration 
to determine why so many VS3000s are enabled.

CAPI3000 E013:

Request for NetWare resource tags failed!

Fatal error. The VS3000 driver cannot allocate resources 
unless NetWare allows, which NetWare does by issuing 
‘resource tags.’

CAPI3000 E014:

Couldn't attach polling procedure!

The VS3000 driver could not activate its background idle 
process. Fatal error.

CAPI3000 E015: 

No identifiable ‘CAPINAME=’ parameter!

The VS3000 driver load line did not contain a VS3000 
configuration name.

CAPI3000 E016:

Requested virtual server name (aaaaaaaa) is already in 
use!

Attempted to load a VS3000 already initialized and 
configured.

CAPI3000 E017:

Path pppppppp to configuration directory not found!

Could not retrieve a VS3000 configuration file because 
the Comtrol-unique directory does not exist. Rerun the 
configuration utility and save the configuration file.

Table 6. CAPI3000 Error Codes

Code

Message and Description

Содержание InterChange VS 3000 Series



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды