Comtrol InterChange VS 3000 Series, Руководство по установке и настройке

Страница: 29 / 98

Configuring MultiProtocol Router (MPR) 29
Installing VS-Link (Novell)
Configuring Bindings
Follow these steps:
1. Select
Bindings
from the Internetworking Configuration menu.
The list of Protocol To Interface/Group Bindings is displayed.
2. Press the
Insert
key.
The list of configured protocols is displayed.
3. Select CAPI VS3000 and press Enter .
You are asked to select the interface to which the protocol is bound.
4. Select
A Network Interface
and press
Enter
.
You are asked to select a configured network interface.
5. Select the name you assigned to this VS3000 and press
Enter
.
The Binding a Miscellaneous Protocol to an Interface window is
displayed.
6. If additional bindings are needed, enter the protocol and command
line parameters here. When done, press
Esc
to close the window.
The list of Protocol to Interface/Group Bindings is displayed.
7. Select
IPX
and press
Enter
.
The Binding IPX to a LAN Interface window is displayed.
8. Examine the default parameters and change them if needed.
9. Press Esc to return to the Protocol To Interface/Group Bindings
window.
10. Press
Esc
to exit to the Internetworking Configuration menu.
Exiting from inetcfg
Changes made in inetcfg do not take effect immediately. To put your
new configuration into effect you must either:
• Select
Reinitialize System
from the Internetworking Configuration
menu, then press
Esc
to exit the configuration program.
-OR-
• Press Esc to exit the configuration program, then down and restart
the server.
Note: As a rule, downing and restarting the server is the surest way of
forcing all configuration changes to take effect.