Comtrol InterChange VS 3000 Series, Руководство по установке и настройке

Страница: 26 / 98

26 Configuring MultiProtocol Router (MPR)
Installing VS-Link (Novell)
c. Enter the directory number in the ISDN Address field.
d. Enter an ISDN Sub-Address, if provided.
e. Select
Modem/DCE Type
and press
Enter
. The list of PPP
Modem/DCE Device Types is displayed.
f. Select
ISDN(AT Controlled)
and press
Enter
.
g. Set Interface Group, Authentication Options, Timeouts &
Retries, Negotiation Options, Enterprise Specific Traps, and
Physical Options as needed. If unsure of the values to use, keep
the defaults.
h. Press
Esc
. You are asked if you want to save your changes.
i. Select Yes and press Enter . You are returned to the Network
Interfaces window. The channel should now show a medium of
PPP
and a status of
Enabled
.
j. Repeat this process for each channel on the VS3000.
3. When you are done, press
Esc
to exit to the Internetworking
Configuration menu.
Configuring the WAN Call Directory
The following procedure is an example of a typical setup. Copy and
adapt this procedure as needed for your installation.
1. From the Internetworking Configuration menu, select
WAN Call
Directory
.
The list of Configured WAN Call Destinations is displayed.
2. Press the
Insert
key.
You are prompted to enter a
New Call Destination Name
.
3. Enter a unique name to identify this destination and press Enter .
You are prompted to choose a supported wide area medium.
4. Select
PPP
and press
Enter
.