Comtrol InterChange VS 3000 Series, Руководство по установке и настройке

Страница: 27 / 98

Configuring MultiProtocol Router (MPR) 27
Installing VS-Link (Novell)
The PPP Call Destination Configuration window is displayed:
5. Enter the following information:
Call Type
: Select
Permanent
.
Interface Group
: Press
Enter
to display and select from the list of
defined groups. If no groups are defined, skip this field.
Interface Name : If you did not select an Interface Group, press Enter
to display and select from the list of enabled PPP interfaces (B
channels).
Telephone Number
: Enter the destination phone number.
Login Script Name, Retry Mode, Retry Limit Handling, Retry Interval
Limit, Idle Connection Timeout
: Use the default values, unless your
application requires different values.
Outbound Authentication
: If required, press
Enter
to display and
select from the list of authentication options.
Password : Enter the outbound authentication password expected
by the remote peer.
Local System ID
: The local system server name is displayed. Press
Enter
to accept it or enter a different name to use when using this
WAN configuration to place an outbound call.
Remote System ID
: Press
Enter
to display and select from the list of
defined Remote System IDs.
Inbound Authentication Update
: Press
Enter
to accept the default
value of
Enabled
.
6. Press
Esc
to exit this window. You are asked if you want to save
your changes.
7. Select
Yes
and press
Enter
. The list of Configured WAN Call
Destinations is displayed.