To dial an IP address directly, dial the IP address digits using * on the keypad as the
dot. Complete the address with a final * or #. When using IP address dialing it is
not possible to specify which line at a gateway is called, so the gateway always
routes IP-address dialed calls to the first line.
Network busy tone (fast busy) will be played for unknown or unreachable
destinations. To answer a call, pick up the phone or press the hands free button.
Caller ID
The Call Manager delivers Caller ID when placing calls. The
caller ID is transmitted to the analog line for CLASS recognition.
Call Hold
To put a call on hold, press flash then hang up (optional). To
return to the original call, press flash or pick up the phone. The
phone will issue a short ring burst every 30 seconds or so while
on-hook to remind you that a call is on hold.
Call Transfer
•
To transfer a call, press flash then dial the new number.
•
To transfer immediately, hang up (blind transfer).
•
To transfer with consultation, wait for the party to answer,
consult, and hang up.
•
To abort the transfer (if the third party does not answer);
press flash to return to the original call.
Conference
Calling
To turn a two-party call into a three-party conference call, press
flash and dial the third party. Wait for the party to answer,
then press flash. To drop the third party and return to a
two-party call, press flash again. To drop yourself out of the
conference, hang up. The call will be transferred (so that the
other two parties remain connected to each other).
NOTE:
In conference mode, the conference initiator
performs the audio bridge/mixing function – there are
only two voice streams established.
Call Waiting
If call waiting is enabled on a line, and you hear the call waiting
tone during a call, press flash to answer the second call. The
first call is automatically placed on hold. To switch between
calls, press flash again.
•
To disable the call waiting feature, dial *60.
•
To enable the call waiting feature, dial *61.
NOTE:
Call forward feature settings (Busy or All) take priority over the
call-waiting feature. The call-waiting feature is ignored on new incoming
calls if there is already a call on hold or in conference.
Call Forward
Number
•
To set the call forward number, dial *74 then the number.
(Note that this does not actually enable forwarding; to do
so, select the call forward action as described below.)
•
To disable all call forwarding features, dial *70
Call Forward
No Answer
•
To enable call forward on no answer, dial *71.
Incoming calls will be forwarded if unanswered for 18 seconds.
Call Forward
Busy
•
To enable call forward if busy, dial *72.
Incoming calls will forward immediately if the phone is off-hook.
Call Forward All
•
To enable call forward for all calls, dial *73.
•
To disable the “forward all calls” feature, dial *75.
Settings for Call Forward Busy or No Answer are not modified.
Call Return
•
To place a call to the last known incoming caller
(unanswered or not), dial *69.
Redial
•
To redial the last outgoing number, dial *68.
96
Содержание CT-6373
