Comtrend Corporation CT-5611E, Руководство пользователя

Страница: 59 / 82

Traffic Class Name
Enter name for traffic class
Assign ATM Transmit Priority Select Low, Medium or High.
Mark IP Precedence Select between 0-7. The lower the digit
shows the higher the priority
Mark IP Type Of Service Select either: Normal Service, Minimize Cost,
Maximize Reliability, Maximize Throughput,
Minimize Delay
Mark 802.1p if 802.1q is enabled
on WAN Select between 0-7. The lower the number
the higher the priority
SET-1
Physical LAN Port Select between ENET and USB.
Protocol TCP, TCP/UDP, UDP or ICMP.
Source IP Address Enter the source IP address.
Source Subnet Mask Enter the subnet mask for the source IP
address.
UDP/TCP Source Port (port or
port:port) Enter source port number or range.
Destination IP address Enter destination IP address.
Destination Subnet Mask Enter destination subnet mask.
UDP/TCP Destination port (port or
port:port) Enter destination port number or range.
SET-2
802.1p Priority Select between 0-7. The lower the digit
shows the higher the priority
58