Comtrend Corporation CT-5611E, Руководство пользователя

Страница: 30 / 82

Step 6: Upon completion, click Next . The following screen appears.
The Device Setup screen allows the user to configure the LAN interface IP address,
subnet mask and DHCP server. To enable DHCP, select
Enable DHCP server and
enter starting and ending IP addresses and the leased time.
This setting configures the router to automatically assign IP, default gateway and
DNS server addresses to every PC on your LAN. Please be aware that the private
address range (e.g. 192.168.1.2 ~ 192.168.1.254) can never include the router’s
LAN interface IP address (e.g. 192.168.1.1 by default).
Select Enable DHCP Server Relay (not available if NAT enabled), and enter the
DHCP Server IP Address. This allows the Router to relay the DHCP packets to the
remote DHCP server. The remote DHCP server will provide the IP address.
To configure a second IP address for the LAN port, click the box shown below.
29