Comtrend Corporation CT-5611E, Руководство пользователя

Страница: 47 / 82

Chapter 6 Advanced Setup
This chapter explains the following advanced setup screens:
6.1 WAN 6.5 Quality of Service
6.2 LAN 6.6 Routing
6.3 NAT 6.7 DNS
6.4 Security 6.8 DSL
6.1 WAN
Follow these steps to configure WAN interfaces.
STEP 1: To Add a new WAN connection, click the Add button. To edit an
existing connection, click the Edit button next to the connection.
To remove a connection select its radio button under the Remove
column of the table and click the Remove button under the table.
Heading Information
VPI/VCI ATM VPI (0-255) / VCI (32-65535)
Con. ID WAN connection ID number
Category ATM service category
Service Name of the WAN connection
Interface Name of the interface for WAN
Protocol Shows the connection type
IGMP Shows enable or disable IGMP proxy
QoS Shows if IP QoS is enabled or disabled
State Shows the connection state of the WAN connection
Remove Used to select connections for removal
Edit Used to edit connections
When editing or adding a connection,
the screen will display as below.
46