Choose
Add
or
Remove
to configure MAC filtering rules. The following screen
will appear when you click
Add
. Create a filter to identify the MAC layer frames
by specifying at least one condition below. If multiple conditions are specified, all
of them must be met. Click
Save/Apply
to save and activate the filter rule.
Field Description
Protocol Type
PPPoE, IPv4, IPv6, AppleTalk, IPX, NetBEUI, IGMP
Destination MAC Address Defines the destination MAC address
Source MAC Address
Defines the source MAC address
Frame Direction
Select the incoming/outgoing packet interface
WAN Interfaces
Applies filter to selected PVCs (bridge mode only).
Filter rules are arranged according to PVC, as shown
under the VPI/VCI heading on the previous screen.
53
Содержание CT-5611E
