Comtrend Corporation CT-5611E, Руководство пользователя

Страница: 35 / 82

Step 5: Click the Next button to continue. On this screen, you may enter the
IP address and Subnet Mask for the LAN interface. Click Next .
NOTE: The LAN IP interface in bridge mode is needed for local users to manage
the device. In addition, there is no IP address for the WAN interface
and therefore the device cannot be accessed remotely in this mode.
STEP 6: Click Next to display the WAN Setup - Summary screen that presents
the entire configuration summary. Click Back to modify the settings.
STEP 7: Click Save/Reboot to apply these settings. The configuration will be
saved to flash memory and then the device will reboot.
After the device reboots, the Web UI should refresh the browser window.
If the browser does not refresh, restart the browser and login again,
following the steps in subsection
3.3 Login Procedure .
34