Comtech EF Data CDM-740, Инструкция по установке и эксплуатации

Страница: 67 / 150

CDM-740 Advanced Satellite Modem Revision 0
Front Panel Operation MN-CDM740
5–15
5.4.4 CONFIG: Remote
Remote Control= Local Serial Ethernet
(
◄►
E)
Select
Local
,
Serial
, or
Ethernet
using the
◄ ►
arrow keys, then press
ENTER
.
If
Local
is selected, then reconfiguration via
Serial Remote
or
Ethernet
is not permitted.
Remote monitoring is still possible.
5.4.4.1 (CONFIG:) Remote Æ Serial
Serial 485 Address: 0001
Baud Rate: 38400(Read only) (
◄►
v
E)
To edit the Serial 485 Address, select each digit of the
Address
using the ◄ ► arrow keys, then edit
the valuve of that digit using the
▲ ▼
arrow keys. Press
ENTER
when done. The permitted address
range is
0001
to
9999
.
Note:
Address 0 is reserved for universal addressing. Character format is not selectable and is fixed
at 8-N-1.
5.4.5 CONFIG: IP
IP Config: GE1 GE2 Mgmt
SNMP: Read-Cmty Write-Cmty Trap
(
◄►
)
On the top line, select
GE1
,
GE2
, or
Mgmt
using the
◄ ►
arrow keys, then press
ENTER
to edit
the pertinent IP Configuration parameters. Note that, with the exception of the screen label, the
function of these three IP configuration submenus is identical. For brevity, all three are explained
next in
Sect. 5.4.5.1
.
On the bottom line, using the
◄ ►
arrow keys to select the SNMP Configuration parameter to edit
(
Read-Cmty
,
Write-Cmt
y, or
Trap)
. Refer to
Sect. 5.4.5.2
through
Sect. 5.4.5.4
for further
details.