Comtech EF Data CDM-740, Инструкция по установке и эксплуатации

Страница: 26 / 150

CDM-740 Advanced Satellite Modem Revision 0
Introduction MN-CDM740
1–2
•
1:1 redundancy switch compatibility
•
The CDM-740 front panel features a Video Fluorescent Display (VFD) and keypad for
local configuration and control; additionally, the unit may be remote-controlled.
•
The CDM-740 is compact – 1RU high X 18.14” deep – and consumes 80 watts
(maximum, without BUC supply) or 300 watts (maximum, with BUC supply).
•
Multiple configurations available, including receive-only and duplex.
1.2 Functional Description
Figure 1-2. CDM-740 Network Topology
Figure 1-2 illustrates the CDM-740 Advanced Satellite Modem as deployed in a typical satellite-
based communications network.
The CDM-740 utilizes a high performance processor and a real-time operating system (RTOS)
combined with multiple Field Programmable Gate Arrays (FPGAs) for optimal performance. All
non-volatile memory is provided by both onboard and Compact Flash devices. Field upgrades are
easily loaded via the Ethernet port; software-based options are added to the unit via FAST (
F ully
A ccessible S ystem T opology) upgrade.
The CDM-740 runs on an embedded operating system and does not have moving parts for media
storage. This design provides carrier class reliability and high speed, purpose-driven processing.
The unit can be managed through multiple interfaces providing options for both in-band and out-
of-band monitor and control:
•
SNMP MIB II and Private MIB, HTTP Web-based Management
•
Telnet (CLI), Terminal Port (CLI)
•
Serial 232/485 and Front Panel control