Computherm KonvekPRO, Руководство по эксплуатации

Страница: 18 / 28

- 18 -
o When the orange LED is on then there is no
need for heating according to the settings
of the thermostat. Then the gas heater
controller warms the temperature sensor
probe of the gas heater with the result that it
does not heat.
o When neither LED is on then there is no
need for heating according to the settings of
the thermostat. The controller has already
warmed up sufficiently the temperature
sensor probe of the gas heater so that that
the gas heater does not heat and it does not
warm currently.
5. ADJUSTMENT OF THE GAS
CONVETOR CONTROLLER
No subsequent adjustments of KonvekPRO are
normally necessary since these were carried out
before shipment. If you deem that the operation of
the device is unstable please follow the instructions
below.