Computherm KonvekPRO, Руководство по эксплуатации

Страница: 14 / 28

- 14 -
2.9. Turn the temperature regulating knob on
your gas heater up to 30 °C (in case of FÉG
products it is grade 6 on a scale to 7).
2.10.
Connect the mains power supply unit
provided in the unit packet to
KonvekPRO
and energize it.
2.11. Put KonvekPRO into AUTO mode with the slide
switch on the top of the appliance. The light
of the orange-color LED on the top of the
appliance provides feedback on automatic
operation of KonvekPRO .
Warning! If you do not switch on KonvekPRO the
gas heater will heat the room to the temperature
set on its own temperature regulator (to approx.
31 °C in case of grade 6.5), irrespective of the
temperature set on the room thermostat. After
KonvekPRO is turned on, the appliance will control
the operation of the gas heater based on the
temperature set on the room thermostat.