Computherm KonvekPRO, Руководство по эксплуатации

Страница: 25 / 28

- 25 -
Symptom Possible cause What to do
The thermostat
does not control
the gas heater
at all.
PSU of the KonvekPRO
has not been connected
properly.
Check that the PSU
of the KonvekPRO is
connected to the
220 V mains and to
KonvekPRO
.
Other case Unknown Turn to the shop
where you bought the
product or Quantrax
Kft. for help.
If you have a digital hand instrument and some technical expertise,
please check whether the PSU provided by KonvekPRO supplies 9 V or
12 V DC voltage (without load it can goes up to 15-20 V which is an
absolutely normal level). Check the thermostat to be connected: the
output of the thermostat is short-circuited in case of heating, otherwise a
broken wire