manualshive.com logo in svg

CompUSA 333628, Руководство пользователя

Поделиться
Скачать
CompUSA 333628 Скачать руководство пользователя страница 8

 

7

DNS Address

   

 

 

This is the ISP’s DNS server IP address  

 

Service Provider Gateway

 

 

This is the ISP’s IP address gateway 

 
 
Click <

OK>

 when you have finished the configuration above. 

Congratulations

! You have completed the configuration 

for the Fixed-IPx DSL connection. Your router is now ready to be used. 
 

1.3 PPPoE 

 
Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP should provide all the 
information required in this section. 
 

 

 
Parameter 

  Description 

 

User Name

 

Enter the User Name provided by your ISP for the PPPoE connection. 

 

Password

 

Enter the Password provided by your ISP for the PPPoE connection. 

 

Service Name

 

This is optional. Enter the Service name should your ISP require it, otherwise leave 
this field blank. 

 

MTU

 

This is optional. You can specify the maximum size of your transmission packet to the 
Internet. Accept the default if you do not wish to set a maximum packet size. 

 

Connection Type

 

If you select “Continuous”, the router will always connect to the ISP. If the WAN line 
breaks down and links again, the router will auto-reconnect to the ISP. 
If you select “Connect On Demand”, the router will auto-connect to the ISP when 
someone wants to use the Internet and will remain connected until the WAN idle 
timeout is reached.  
If you select “Manual”, the router will connect to the ISP only when you click 
“Connect” manually from the Web user interface. The WAN connection will not 
disconnect due to the idle timeout feature. If the WAN line breaks down and latter 
links again, the router will not auto-connect to the ISP. 

 

Idle Time

 

You can specify an idle time threshold (minutes) for the WAN port. This means if no 
packets have been sent during the specified period (no one is using the Internet), the 
router will automatically disconnect the connection with your ISP. 

 
 
Click <

OK>

 when you have finished the configuration above. 

Congratulations

! You have completed the configuration 

for the PPPoE connection. Your router is now ready to be used. 
 
 
 
 
 
 

Содержание 333628







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды