CompUSA 333628, Руководство пользователя

Страница: 27 / 70

26
2.4.2 Advanced Settings
You can set advance wireless LAN parameters of this router. These parameters include:
Authentication Type, Fragment Threshold, RTS Threshold, Beacon Interval, Preamble Type, etc.
You should not change these parameters unless you know what effect the changes will have on
your wireless network.
Parameters
Default Description
Authentication Type
There are two authentication types: "Open System" and "Shared Key". When
you select "Open System", wireless stations can access this wireless router
without WEP encryption. When you select "Shared Key", you should also
setup WEP key in the "Encryption" page and wireless stations should use
WEP encryption in the authentication phase to associate with this wireless
router. If you select "Auto", the wireless client can associate with this wireless
router by using either one of these two authentication types.
Fragment Threshold "Fragment Threshold" specifies the maximum size of packet during the
fragmentation of data to be transmitted. If you set this value too low, it will
result in reduced performance.
RTS Threshold When the packet size is smaller than the RTS threshold, the wireless router
will not use the RTS/CTS mechanism to send this packet.
Beacon Interval The interval of time that this wireless router broadcast a beacon. Beacon is
used to synchronize the wireless network.
Data Rate The “Data Rate” is the rate this access point uses to transmit data packets.
The access point will use the highest possible selected transmission rate to
transmit the data packets.
Preamble Type The “Long Preamble” can provide better wireless LAN compatibility while the
“Short Preamble” can provide better wireless LAN performance.
Broadcast ESSID If you enable “Broadcast ESSID”, every wireless station located within the
coverage of this access point can discover this access point. If you are