CompUSA 333628, Руководство пользователя

Страница: 26 / 70

25
Parameters Default Description
Mode
It allows you to set the AP to AP, Station, Bridge, or WDS mode.
Band
It allows you to set the AP fix at 802.11b or 802.11g mode. You can
also select B+G mode to allow the AP select 802.11b and 802.11g
connection automatically.
ESSID default This is the name of the wireless LAN. All the devices in the same
wireless LAN should have the same ESSID.
Channel Number 11 The channel used by the wireless LAN. All devices in the same
wireless LAN should use the same channel.
Associated Clients Click “Show Active Clients” button, then an “Active Wireless Client
Table” will pop up. You can see the status of all active wireless
stations that are connecting to the access point.
WLAN MAC This is the MAC address used by the Wireless interface of this AP
when it is in the station mode.
Clone MAC Clicking the “Clone MAC” button will copy the MAC address of your
PC, that you are using to configure the AP, to the WLAN MAC.
MAC address If you want to bridge more than one network together with wireless
LAN, you have to set this access point to “AP Bridge-Point to Point
mode”, “AP Bridge-Point to Multi-Point mode”, or “AP Bridge-WDS
mode”. You have to enter the MAC addresses of other access points
that join the bridging work.
Set Security Click the “Set Security” button, then a “WDS Security Settings” will
pop up. You can set the security parameters used to bridge access
points together here when your AP is in AP Bridge modes.
Click < Apply> at the bottom of the screen to save the above configurations.