Compur Statox 502, Руководство пользователя

Страница: 9 / 40

Statox 502 Control Module
Issue 1/2015 Page 9 of 40
Product characteristics
Controls
The Statox 502 has four push buttons.
Button Function
Enter Enter.
Reset Deletes wrong entries, resets the alarm relays, goes one step back in the menu.
Left
*)
Navigates left in the menu, reduces a programmed figure, changes the first
display line when in the measuring mode.
Right
*)
Navigates right in the menu, increases a programmed figure, changes the first
display line when in the measuring mode.
*)
In some menus a continuous push activates the fast mode
LEDs
The Statox 502 has 4 status LEDs. The function of the individual LEDs is subsequently explained.
Description LED Function
ON Green
Power supply:
„ON“ Power ON
„OFF“ Power voltage off or too low
A1 Yellow Relays 1: Alarm threshold exceeded
A2 Yellow Relays 2: Alarm threshold exceeded
S Red
Failure or service request:
„Flashing“
Service Mode
„ON“ System Failure
„OFF“ Measuring mode