http://www.CompeGPS.com http://Support.CompeGPS.com 21
TwoNav will attempt to fix the current position. If you are anywhere without GPS cover (e.g.:
inside a building), the GPS status will be “
Without position
”; i.e.: TwoNav has successfully
established communication with the GPS, but the GPS cannot fix your position because there is
no satellite signal.
GPS possible states:
Disconnected
Connecting...
Error (not found)
Connected without position
Connected and with position
Simulating
Battery:
you will be able to see the percentage of load in the battery and, by clicking on it,
you may manage the autonomy options of the device. (
+info
)
Brightness:
percentage of luminosity displayed by the screen. (
+info
).
Audio:
set the general audio and the volume of each audible element individually. (
+info
).
Triplog:
by keeping the
‘record’ button pressed, the present track will be saved. Data
fields and recorded tracks are synchronized, so if you press ‘pause’, you pause both counters
(chronometer, distance, mean speed...) and track recording until ‘record’ is pressed again.
Press ‘stop’ to reset the triplog (
+info
).
3.3.6
Settings
The page ‘Settings’ enters the main options to customize TwoNav for each type of use (see
section
Settings
for more details).
These options are grouped in the following sections ‘
Display
’, ‘
Vehicle
’, ‘
Navigation
’, ‘
System
’.
3.4
Contextual menus
TwoNav uses Contextual Menus to enter the most adequate functions for each moment and
option in an easy and quick manner.
