NorthStar 951 Operator'S Manual Download | Manualshive

Page: 1 / 206

background image

Limited warranty policy

Northstar Technologies, a division of BSC, Inc., warrants the Northstar 951/952 to be free
from defects in materials and workmanship for a period of two (2) years. This warranty
applies to the original purchaser and to any subsequent owner during the warranty
period, which begins on the date of shipment of the unit, F.O.B. Acton, Massachusetts, to
an authorized Northstar dealer.

Systems may not be returned to Northstar without a Returned Materials Authorization
(RMA) number. Call your Northstar dealer or Northstar for instructions.

During the unit’s warranty period, Northstar will repair or replace, at its option, any part of
the unit it finds to be defective due to faulty material(s) or workmanship. All such repairs
and/or replacements will be promptly performed by Northstar free-of-charge to the owner,
excluding freight costs incurred in shipping to the factory. Return shipments from North-
star to points within the United States are made via ground transportation, freight prepaid.
Special shipping charges (overnight, two-day, and so on) are the responsibility of the
owner.

To be covered by this warranty, the Northstar equipment must have been in normal use.
This warranty does not apply to units with defects caused by improper installation, phys-
ical damage, abuse, tampering, lightning or other abnormal electrical discharge, or to
units with defaced or altered serial numbers, or to units repaired by unauthorized persons
or repaired in a manner that violates Northstar’s recommended service procedures.

All repairs and/or replacements made under this warranty must be performed at North-
star’s facilities in Acton, Massachusetts. Performance of warranty work elsewhere will not
be authorized, and Northstar will not pay for any charges for such work. Northstar will not
be responsible for payment of any charges imposed by a Northstar dealer or other party
for services requested by and/or performed for a unit’s owner in connection with this
warranty. Such services might include removal of the unit from a vessel, inspection, pack-
aging, handling, reinstallation, and the like.

Northstar Technologies assumes no responsibility for any consequential losses of any
nature with respect to any of its products or services sold, rendered, or delivered. The
foregoing is the only warranty expressed or implied. No other warranty exists.

1
2
3
...
»

Summary of Contents for 951















































































































































































































Reviews:

No comments

Related manuals for 951

iTrackU SiRF III

Brand: XAiOX Pages: 24

Brand: danew Pages: 16

Brand: I.Trek Pages: 8

Brand: C-Nav Pages: 166

Brand: e2Link Pages: 13

Brand: Abeeway Pages: 39

Brand: MVP Recovery Pages: 6

Brand: MyFlyDream Pages: 30

Brand: Samsara Pages: 8

MICROTRACKER MT-01

Brand: Maestro Pages: 56

Brand: Salind Pages: 24

Brand: Navilock Pages: 13

Brand: Gas Data Pages: 23

Brand: Garmin Pages: 125

Brand: Queclink Pages: 14

Brand: Garmin Pages: 4

Brand: Navman Pages: 56

Brand: Garmin Pages: 214

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands