http://www.CompeGPS.com http://Support.CompeGPS.com 24
b. Select ‘Change this data field’
c. Choose the sensor datafield from ‘sensors’ category
3. Make long press on the data field you want to activate (Heart rate, Cadence or Sensor
Speed).
4. Select 'Activate HR/Cad/SSp'.
Ultra will search for sensor signal and display it if available. Data will be also saved in currently
recorded track for each track point, so you can analyse the complete trip from CompeGPS Land
PC software.
Note:
TwoNav will try to activate all ANT+™ sensors at start.
4 Settings
TwoNav is set by default so as to meet the needs of most users. However, it is important that
you spend some time analyzing which are the best options for the use you want to give to it and
to adapt it to the conditions in each moment.
4.1
On-road/Off-road Selector
TwoNav has two navigation modes:
On-road and Off-road
. You can clearly see the mode you
are on by looking at the colour of the users interface (green or grey). The functionalities of the
program also change in various aspects, which are generally explained in this section and are
detailed in other sections of this manual.
You may change the TwoNav navigation mode by pressing on the tabs on the top of the Main
menu:
•
Off-road
: The areas where open air activities are carried out do not usually have
usable information for the automatic calculation of the route, and therefore cartography
will only be useful as a visual reference. In order to have assistance for orientation you
will have to use positional references (waypoints, routes and tracks) that you can create
yourself or get from diverse sources, such as friends, web pages or Internet forums.
See sections ‘
Waypoints
,
Routes
and
Tracks
’.
•
On-road
: It uses the information of the road maps (V-maps from CompeGPS) to
calculate automatically the route that we must follow to reach our destination. This route
will take into consideration the available roads and will give detailed orientation through
them using visual and voice indications. See sections ‘
Automaps
’.
Important
: On-road mode will only be available if you have a routable V-map present in
maps folder
. Otherwise, On-road tab will be disabled.
