http://www.CompeGPS.com http://Support.CompeGPS.com 20
•
Zoom to...:
Choose the element (address, POI, favourite, data or coordinates) that you
wish to see on the map and it will be displayed on a new window.
•
Geocaching:
This section centralizes geocaching features, allowing to set a geocache
as destination, see its information and generate field notes.
•
Simulate:
You may select two spots
(present position, by address, by map, POI, etc.) to
execute a simulation of navigation from spot
A
to spot
B
.
•
Stop simulation:
It stops the ongoing simulation.
•
3D Panorama:
By using this option you may get an aerial view of the surroundings. In
order to do it,
3D mode
must be activated.
•
Data pages
(
+info
)
3.3.5
Status
The ‘Status’ allows you to know the general status of the TwoNav by displaying fields such as
battery level, reception and position of satellites, luminosity of the screen, sound volume or the
recording of a track.
There are two ways of entering the ‘Status’ page:
•
From ‘Main Menu > Status’
•
From the map, with the icons located on the bottom left
Once in the ‘Status’ page, you may enter to set the parameters it contains by pressing briefly on
the percentage bar of each element. You will then enter the following items:
Satellites status:
enter to see the number of satellites available, their distribution orbiting
over the vault and the coverage they reach.
To disconnect the GPS press on the
button. If the GPS is disconnected, TwoNav will not
receive any position signal and many of the options will stop working properly.
