http://www.CompeGPS.com http://Support.CompeGPS.com 46
•
Speed to block interface
: When is higher than this value, User Interface will be blocked
to user can not manipulate the system. It is important to configure this function according
to laws of each country.
•
Radar alert:
You may select if you wish to be informed of the presence of radars on your
route by activating this option.
•
Radar distance alert:
You may select the distance at which you wish to be informed of
the presence of a radar within some preset values.
•
Show radars:
The exact position of all radars will be indicated by means of an icon on
the map. I have a question.
Note
: For all the radar related functions to be operative you must have a file with this information
in ‘TwoNavData > Radars’ (
+info
).
4.8.4
Ecocalculator
The Ecocalculator lets you know the CO
2
emissions of your car and show it after the Data Bar
(
Data fields
) during navigation if preset. To be able to calculate this emission, TwoNav considers
the following parameters:
•
Type of fuel: choose if the fuel is diesel or gasoline and introduce directly the emission
per grams of CO
2
per kilometre of your vehicle if you know this data.
•
Administrative Power: engine power (CV), choosing among the preset options shown.
4.8.5
Tracklog
While navigating, TwoNav may
automatically record the track
of your departure and save it in the
TwoNavData folder
.
Set up according to your needs or preferences:
•
Recording interval
: Choose the type of recording and interval you wish for the track to
be generated for your navigation.
o
By time:
The point of each track will be recorder every X seconds.
o
By distance
: The point of each track will be recorder every X meters.
o
Automatic
: the track will be automatically recorded when changing course and
depending on speed. In a straight line, the program will record few points.
•
Track colour*
: Choose the colour for the generated track.
•
Thickness*
: Choose the thickness of the line representing the track between values of 1
to 7 points.
•
Points shown without reduction*
: The recorded track will be visible on the screen.
Latest points will be shown as they are recorded (no reduction). You can choose how
long will be this latest section of the track which will show all of its track points.
•
Reduction for previous points*
: In order to save memory, it is recommended to make a
reduction of the rest of the shown track. Choose a reduction % and the shown track
(except the latest points) will be reduced. For example, if you choose 80% reduction, only
1 of every 5 points will be shown on screen.
Important
: This reduction does not affect the recorded track file, which will keep all
points. Only concerns to what is displayed on screen at that moment.
*
Option only shown if ‘
advanced mode
’ is activated.
