Compaq StorageWorks 2100 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 100

background image

Notice

© 2000 Compaq Computer Corporation.

COMPAQ, Compaq logo, and StorageWorks Registered in U. S. Patent and Trademark Office.
NonStop is a trademark of Compaq Information Technologies Group, L.P.

All other product names mentioned herein may be trademarks or registered trademarks of their
respective companies.

Compaq shall not be liable for technical or editorial errors or omissions contained herein. The
information in this document is subject to change without notice.

The information in this publication is subject to change without notice and is provided “AS IS”
WITHOUT WARRANTY OF ANY KIND. THE ENTIRE RISK ARISING OUT OF THE USE OF
THIS INFORMATION REMAINS WITH RECIPIENT. IN NO EVENT SHALL COMPAQ BE
LIABLE FOR ANY DIRECT, CONSEQUENTIAL, INCIDENTIAL, SPECIAL, PUNITIVE OR
OTHER DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR LOSS OF BUSINESS
INFORMATION), EVEN IF COMPAQ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. THE FOREGOING SHALL APPLY REGARDLESS OF THE NEGLIGENCE OR
OTHER FAULT OF EITHER PARTY AND REGARDLESS OF WHETHER SUCH LIABILITY
SOUNDS IN CONTRACT, NEGLIGENCE, TORT, OR ANY OTHER THEORY OF LEGAL
LIABILITY, AND NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY
LIMITED REMEDY.

The limited warranties for Compaq products are exclusively set forth in the documentation
accompanying such products. Nothing herein should be construed as constituting a further or
additional warranty.

Printed in the U.S.A.

Compaq StorageWorks Model 2100 and 2200 Ultra SCSI Controller Enclosures User Guide
Third Edition (June 2000)
Part Number: EK–SE2C8–UA. C01

«
1
2
3
4
...
»

Содержание StorageWorks 2100





































































































Отзывы:

Нет отзывов

Похожие инструкции для StorageWorks 2100

Бренд: Macally Страницы: 22

ARMOR CASE BLOCK ACTIVE

Бренд: Joy-it Страницы: 4

Бренд: StarTech.com Страницы: 2

Бренд: AEONS Technologies Страницы: 12

Бренд: Abtech Страницы: 2

Бренд: Vectronics Страницы: 2

Stopper STI-1229HTR240

Бренд: STI Страницы: 2

Бренд: Peavey Страницы: 2

Бренд: Peavey Страницы: 4

EliteRAID ER104CT

Бренд: Sans Digital Страницы: 12

Бренд: Hunter Страницы: 2

Бренд: Mustee Страницы: 4

Бренд: CRU Страницы: 12

MS2 4000 Series

Бренд: 3M Страницы: 40

Бренд: GAI-Tronics Страницы: 6

Бренд: Macally Страницы: 18

Бренд: Synology Страницы: 14

THUNDERBOLT SERIES

Бренд: LaCie Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды