Compaq.com - Compaq Presario Maintenance and Service Guide - 2250, 2410 ES, 2510, and 4240 ES Series
United States December 10, 2002
Maintenance & Service Guide
Presario 2250 Series
2510, 2410 ES & 4240 ES Personal Computers
|
|
|
Removal and Replacement
Removing the Power Supply
Disassembly
Sequence
Power
Supply
Processor
Removing the Power Supply
1.
Perform the
preparation
procedures.
2.
3.
Move the
air baffle
out of the
way.
4.
Disconnect
the power
cables from
the
drive, and
CD/DVD
drive cables
.
5.
Disconnect
the power
supply
cable from
the system
board.
6.
Remove
the four
screws that
hold the
power
supply onto
the rear
wall of the
chassis.
7.
Slide the
power
supply back
and lift it
out of the
chassis.
NOTE:
The
adhesive
material
that holds
the air
baffle in
place can
only be
used
once. Do
not
attempt to
remove or
reuse te
air baffle
that was
originally
installed
in the
unit.
End of
sequence. To
replace the
power supply,
reverse this
procedure.
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/2000/pwrsupp.html [12/10/2002 9:01:58 AM]