Compaq.com - Compaq Presario Maintenance and Service Guide - 2250, 2410 ES, 2510, and 4240 ES Series
United States December 10, 2002
Maintenance & Service Guide
Presario 2250 Series
2510, 2410 ES & 4240 ES Personal Computers
|
|
|
|
Removal and Replacement
Removing the Drive Cage
Disassembly
Sequence
Drive Cage
Processor
All the mass
storage
devices are
secured in a
drive cage
within the
chassis. You
will need to
remove the
drive cage to
remove or
replace any of
the mass
storage
devices in the
computer. To
remove the
drive cage,
complete the
following
steps:
1.
Perform the
preparation
procedures.
2.
3.
Move the
air baffle
out of the
way.
4.
Disconnect
the
cables.
5.
Remove
the three
screws
from the
drive cage,
slide the
drive cage
back, and
lift it up out
of the
chassis
End of
sequence. To
replace the
drive cage,
reverse this
procedure.
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/2000/drive.html [12/10/2002 9:00:38 AM]