Compaq.com - Compaq Presario Maintenance and Service Guide - 2250, 2410 ES, 2510, and 4240 ES Series
United States December 10, 2002
Maintenance & Service Guide
Presario 2250 Series
2510, 2410 ES & 4240 ES Personal Computers
|
|
Removal and Replacement
Button Board and Cable Assembly
Disassembly
Sequence
Button
Board &
Cable
Processor
Removing the Button Board & Cable Assembly
Perform the
preparation
procedures.
Move the
air baffle
out of the
way.
Remove
the drive
cage from
the chassis.
Remove
the front
bezel from
the chassis.
6.Disconnect
the button
board cable
from the
system
board, and
thread the
cable out
through the
front of the
chassis.
7.Remove
the two
screws that
hold the
button
board onto
the front
bezel.
End of
sequence. To
replace the
button board,
reverse this
procedure.
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/2000/button.html [12/10/2002 9:01:48 AM]