Compaq 5500R - ProLiant - 256 MB RAM, Руководство по техническому обслуживанию и ремонту

Страница: 47 / 165

2-32 Compaq ProLiant 5500 and 5500R Maintenance and Service Guide
For use with Pentium II and Pentium III Xeon processor-based servers only
Memory
Compaq ProLiant 5500 and 5500R Servers:
■
Support buffered-EDO, 60-ns or faster, 32-, 64-, 128-, or 256-megabyte DIMMs.
■
Support up to 4 gigabytes of memory.
■
Support up to four memory banks, each bank consisting of four DIMMs. Install or remove
one bank at a time. Each DIMM of a given bank must be of the same size, type, speed, and
manufacturer.
CAUTION: Use only Compaq EDO, ECC DIMMs. DIMMs from other sources may adversely
affect data integrity. Power-On Self-Test (POST) will warn of non-supported DIMMs.
NOTE: If you mix banks of 50-ns and 60-ns DIMMs, the entire memory subsystem will be adjusted to
run at the slower DIMM speed.
DIMM 3
DIMM 4
DIMM 7
DIMM 8
DIMM 11
DIMM 12
DIMM 15
DIMM 16
DIMM 1
DIMM 2
DIMM 5
DIMM 6
DIMM 9
DIMM 10
DIMM 13
DIMM 14
Bank 1
Bank 2
Bank 3
Bank 4
Figure 2-26. Memory banks on the memory board
The recommended DIMM installation order is:
■
Bank One – DIMM 1, DIMM 2, DIMM 3, DIMM 4
■
Bank Two – DIMM 5, DIMM 6, DIMM 7, DIMM 8
■
Bank Three – DIMM 9, DIMM 10, DIMM 11, DIMM 12
■
Bank Four – DIMM 13, DIMM 14, DIMM 15, DIMM 16