Compaq 5500R - ProLiant - 256 MB RAM, Руководство по техническому обслуживанию и ремонту

Страница: 16 / 165

For use with Pentium II and Pentium III Xeon processor-based servers only
Chapter
2
Removal and Replacement Procedures
This chapter provides subassembly/module-level removal and replacement procedures for
Compaq ProLiant 5500 and 5500R Servers. After completing all necessary removal and
replacement procedures, run the diagnostics program to verify that all components operate
properly.
To service Compaq ProLiant 5500 and 5500R Servers, the following items are recommended:
■
Torx T-15 screwdriver
■
Phillips screwdriver
■
From the Compaq SmartStart and Support Software CD:
!"
System configuration utility software
!"
Drive Array Advanced Diagnostics software
!"
Diagnostics software
Electrostatic Discharge Information
A discharge of static electricity can damage static-sensitive devices or microcircuitry. Proper
packaging and grounding techniques are necessary precautions to prevent damage. To prevent
electrostatic damage, observe the following precautions:
■
Transport products in static-safe containers such as conductive tubes, bags, or boxes.
■
Keep electrostatic-sensitive parts in their containers until they arrive at static-free stations.
■
Cover servers or work area with approved static-dissipating material. Provide a wrist strap
connected to the work surface and properly grounded tools and equipment.
■
Keep work area free of nonconductive materials such as ordinary plastic assembly aids
and foam packing.
■
Make sure you are properly grounded when touching a static-sensitive component or
assembly.
■
Avoid touching pins, leads, or circuitry.
■
Always place drives PCB (Printed Circuit Board) assembly side down.
■
Use conductive field service tools.