4
Fig. 2
Guarantee
Operate this compressor only if you have an exact
knowledge of the machine taking into respect these in-
structions.
CompAir Drucklufttechnik cannot be held responsible
for the safe operation of the machine/unit if it is used in
a manner, which does not correspond to the intended
use, or for other applications, which are not mentioned
in these instructions.
Warranty claims will not be accepted in the case of
• Operating errors
• Incorrect maintenance
• Wrong auxiliary materials
• Use of spare parts other than CompAir original
spare parts
• Modifications and changes to the installation
The warranty and liability conditions of the general
terms and conditions of CompAir Drucklufttechnik will
not be extended by the notes above.
Any unauthorized change to the compressor unit/sta-
tion, or the installation of components not accepted by
the manufacturer (e.g. fine separator) will result in the
withdrawal of the CE mark. As a consequence, any lia-
bility and warranty claims will not be accepted by the
manufacturer.
1.4
Notes
General
These operating instructions are intended to familiar-
ize the user with the machine/unit and its intended use.
The instructions contain important notes on how to
operate the compressor safely, properly and cost-effec-
tively. Observing these instructions helps to avoid risks,
to reduce repair costs and downtimes and to increase
the reliability and service life of the machine/unit.
The operating instructions have to be supplemented
by the respective national rules and regulations regard-
ing the prevention of accidents and environmental pro-
tection. They must always be available at the location
of the machine/unit. The operating instructions must be
read and followed by any person carrying out work in
connection with the machine/unit, e.g. operation,
including setting up, trouble-shooting in the operation
cycles, disposal of production waste, care, service, and
disposal of waste fuels and consumables, upkeep
(maintenance, inspection, repair), transport.
Besides the operating instructions and the binding
regulations for the prevention of accidents, which are
valid in the country and place of operation of the ma-
chine/unit, the generally recognized technical regula-
tions for safe and proper working have also to be ob-
served.
1. Foreword
Safety regulations
Danger
.
The safety regulations in chapter 3 of the operating
instructions have to be strictly observed.
Technical changes
In the course of technical development we reserve the
right to modify the units without further notice.
