manualshive.com logo in svg

Comnet CWGE26FX2TX24MSPOE, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CWGE26FX2TX24MSPOE Скачать руководство пользователя страница 44

INS_CWGE26FX2TX24MSPOE_REV–     5 Mar 2014     PAGE 44

INSTALLATION AND OPERATION MANUAL 

CWGE26FX2TX24MSPOE

TECH SUPPORT: 1.888.678.9427

STP 

STP Bridges

This page provides a status overview for all STP bridge instances.

The displayed table contains a row for each STP bridge instance, where the column displays the 
following information:

Label

Description

MSTI

The Bridge Instance. This is also a link to the STP Detailed Bridge Status.

Bridge ID

The Bridge ID of this Bridge instance.

Root ID

The Bridge ID of the currently elected root bridge.

Root Port

The switch port currently assigned the root port role.

Root Cost

Root Path Cost. For the Root Bridge this is zero. For all other Bridges, it is the sum of 
the Port Path Costs on the least cost path to the Root Bridge.

Topology Flag

The current state of the Topology Change Flag for this Bridge instance.

Topology 
Change Last

The time since last Topology Change occurred.

Refresh

Click to refresh the page immediately.

Auto-Refresh

Check this box to enable an automatic refresh of the page at regular intervals.

Содержание CWGE26FX2TX24MSPOE











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды