INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 21
INSTALLATION AND OPERATION MANUAL
CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
IP Setting
Configure the switch-managed IP information on this page.
Label
Description
DHCP Client
Enable the DHCP client by checking this box. If DHCP fails and the configured IP
address is zero, DHCP will retry. If DHCP fails and the configured IP address is non-
zero, DHCP will stop and the configured IP settings will be used. The DHCP client will
announce the configured System Name as hostname to provide DNS lookup.
IP Address
Assign the IP address that the network is using. If DHCP client function is enabling,
you do not need to assign the IP address. The network DHCP server will assign the IP
address for the switch and it will be display in this column. The default IP is 192.168.10.1
IP Mask
Assign the subnet mask of the IP address. If DHCP client function is enabling, you do
not need to assign the subnet mask
IP Router
Assign the network gateway for the switch. The default gateway is 192.168.10.254
VLAN ID
Provide the managed VLAN ID. The allowed range is 1 through 4095.
SNTP Server
Provide the IP address of the SNTP Server in dotted decimal notation.
Save
Click to save changes.
Reset
Click to undo any changes made locally and revert to previously saved values.
