manualshive.com logo in svg

Comnet CWGE24MS, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CWGE24MS Скачать руководство пользователя страница 82

INS_CWGE24MS_REV–

02/18/13     PAGE 82

INSTALLATION AND OPERATION MANUAL 

CWGE24MS

TECH SUPPORT: 1.888.678.9427

Aging Configuration

By default, dynamic entries are removed from the MAC table after 300 seconds. This removal is 
also called aging. 

Configure aging time by entering a value here in seconds. The allowed range is 10 to 1000000 
seconds. 

Disable the automatic aging of dynamic entries by checking:

MAC Table Learning

If the learning mode for a given port is grayed out, another module is in control of the mode and 
the user cannot change it. An example of such a module is the MAC-Based Authentication under 
802.1X.

Each port can perform learning based upon the following settings:

Label

Description

Auto

Learning is done automatically as soon as a frame with unknown 
SMAC is received.

Disable

No learning is done.

Secure

Only static MAC entries are learned, all other frames are dropped. 
Note: Make sure that the link used for managing the switch is added to 
the Static Mac Table before changing to secure learning mode, otherwise 
the management link is lost and can only be restored by using another 
non-secure port or by connecting to the switch via the serial interface.

Содержание CWGE24MS














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды