manualshive.com logo in svg

Comnet CWGE24MS, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CWGE24MS Скачать руководство пользователя страница 69

INS_CWGE24MS_REV–

02/18/13     PAGE 69

INSTALLATION AND OPERATION MANUAL 

CWGE24MS

TECH SUPPORT: 1.888.678.9427

Traffic Prioritization

Port Configuration

This page allows you to configure QoS settings for each port. Frames can be classified by 4 
different QoS classes: Low, Normal, Medium, and High. The classification is controlled by a QCL 
that is assigned to each port.

A QCL consists of an ordered list of up to 12 QCEs. Each QCE can be used to classify certain 
frames to a specific QoS class. This classification can be based on parameters such as VLAN ID, 
UDP/TCP port, IPv4/IPv6 DSCP or Tag Priority. Frames not matching any of the QCEs are classified 
to the default QoS class for the port.

ˇ 
ˇ 
ˇ 

Port QoS Configuration

Label

Description

Port

A check box is provided for each port of a private VLAN.  
When checked, port isolation is enabled for that port. 
When unchecked, port isolation is disabled for that port. 
By default, port isolation is disabled for all ports.

Default Class

Configure the default QoS class for the port, that is, the QoS class for 
frames not matching any of the QCEs in the QCL.

QCL#

Select which QCL to use for the port.

Tag Priority

Select the default tag priority for this port when adding a Tag to the 
untagged frames.

Queuing Mode

Select which Queuing mode for this port.

Queue Weighted Setting Queue weighted (Low=Normal, Medium=High) if the 

“Queuing Mode” is “Weighted”.

Содержание CWGE24MS














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды