manualshive.com logo in svg

Comnet CWGE24MS, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CWGE24MS Скачать руководство пользователя страница 63

INS_CWGE24MS_REV–

02/18/13     PAGE 63

INSTALLATION AND OPERATION MANUAL 

CWGE24MS

TECH SUPPORT: 1.888.678.9427

Label

Description

Trap Mode

Indicates the SNMP trap mode operation. Possible modes are: 
Enabled: Enable SNMP trap mode operation.
Disabled: Disable SNMP trap mode operation.

Trap Version

Indicates the SNMP trap supported version. Possible versions are: 
SNMP v1: Set SNMP trap supported version 1.
SNMP v2c: Set SNMP trap supported version 2c.
SNMP v3: Set SNMP trap supported version 3.

Trap Community Indicates the community access string when send SNMP trap packet. 

The allowed string length is 0 to 255, and the allowed content is the 
ASCII characters from 33 to 126.

Trap Destination 
Address

Indicates the SNMP trap destination address. 
Trap Destination IPv6 Address

Trap Destination 
IPv6 Address 

Provide the trap destination IPv6 address of this switch. IPv6 
address is in 128-bit records represented as eight fields of up to four 
hexadecimal digits with a colon separates each field (:). For example, 
‘fe80:215:c5ff:fe03:4dc7’. The symbol ‘::’ is a special syntax that can 
be used as a shorthand way of representing multiple 16-bit groups of 
contiguous zeros; but it can only appear once. It also used a following 
legally IPv4 address. For example, ‘::192.1.2.34’.

Trap 
Authentication 
Failure

Indicates the SNMP entity is permitted to generate authentication 
failure traps. Possible modes are: 
Enabled: Enable SNMP trap authentication failure.
Disabled: Disable SNMP trap authentication failure.

Trap Link-up and 
Link-down

Indicates the SNMP trap link-up and link-down mode operation. 
Possible modes are: 
Enabled: Enable SNMP trap link-up and link-down mode operation.
Disabled: Disable SNMP trap link-up and link-down mode operation.

Trap Inform  
Mode

Indicates the SNMP trap inform mode operation. Possible modes are: 
Enabled: Enable SNMP trap inform mode operation.
Disabled: Disable SNMP trap inform mode operation.

Содержание CWGE24MS














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды