INS_CWGE24MS_REV–
02/18/13 PAGE 60
INSTALLATION AND OPERATION MANUAL
CWGE24MS
TECH SUPPORT: 1.888.678.9427
Private VLAN
The Private VLAN membership configurations for the switch can be monitored and modified here.
Private VLANs can be added or deleted here. Port members of each Private VLAN can be added
or removed here. Private VLANs are based on the source port mask, and there are no connections
to VLANs. This means that VLAN IDs and Private VLAN IDs can be identical.
A port must be a member of both a VLAN and a Private VLAN to be able to forward packets. By
default, all ports are VLAN unaware and members of VLAN 1 and Private VLAN 1.
A VLAN unaware port can only be a member of one VLAN, but it can be a member of multiple
Private VLANs.
Label
Description
Delete
Check to delete the entry. It will be deleted during the next save.
Private VLAN ID Indicates the ID of this particular private VLAN.
MAC Address
The MAC address for the entry.
Port Members
A row of check boxes for each port is displayed for each private VLAN
ID. To include a port in a Private VLAN, check the box. To remove
or exclude the port from the Private VLAN, make sure the box is
unchecked. By default, no ports are members, and all boxes are
unchecked.
Add New
Private VLAN
Select
Add New Private VLAN
to add a new private VLAN ID. An
empty row is added to the table, and the private VLAN can be
configured as needed. The allowed range for a private VLAN ID is
the same as the switch port number range. Any values outside this
range are not accepted, and a warning message appears. Select
OK
to discard the incorrect entry, or Select
Cancel
to return to the editing
and make a correction.
The Private VLAN is enabled when you Select
Save
.
The
Delete
button can be used to undo the addition of new Private
VLANs.
