manualshive.com logo in svg

Comnet CWGE24MS, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CWGE24MS Скачать руководство пользователя страница 34

INS_CWGE24MS_REV–

02/18/13     PAGE 34

INSTALLATION AND OPERATION MANUAL 

CWGE24MS

TECH SUPPORT: 1.888.678.9427

LACP Status

This page provides a status overview for LACP status for all ports.

Label

Description

Port

The switch port number.

LACP

‘Yes’ means that LACP is enabled and the port link is up. ‘No’ means 
that LACP is not enabled or that the port link is down. ‘Backup’ means 
that the port could not join the aggregation group but will join if other 
port leaves. Meanwhile its LACP status is disabled.

Key

The key assigned to this port. Only ports with the same key can 
aggregate together.

Aggr ID

The Aggregation ID assigned to this aggregation group. 

Partner System 
ID

The partners System ID (MAC address).

Partner Port

The partners port number connected to this port.

Refresh

Select to refresh the page immediately.

Auto-refresh

Check this box to enable an automatic refresh of the page at regular 
intervals.

Содержание CWGE24MS














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды