manualshive.com logo in svg

Comnet CWGE24MS, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CWGE24MS Скачать руководство пользователя страница 68

INS_CWGE24MS_REV–

02/18/13     PAGE 68

INSTALLATION AND OPERATION MANUAL 

CWGE24MS

TECH SUPPORT: 1.888.678.9427

SNMP-Accesses

Configure SNMPv3 accesses table on this page. The entry index keys are Group Name, Security 
Model and Security Level.

Label

Description

Delete

Check to delete the entry. It will be deleted during the next save.

Group Name

A string identifying the group name that this entry should belong to. 
The allowed string length is 1 to 32, and the allowed content is the 
ASCII characters from 33 to 126.

Security Model

Indicates the security model that this entry should belong to. Possible 
security models are: 
any: Accepted any security model (v1|v2c|usm).
v1: Reserved for SNMPv1.
v2c: Reserved for SNMPv2c.
usm: User-based Security Model (USM).

Security Level

Indicates the security model that this entry should belong to. Possible 
security models are: 
NoAuth, NoPriv: No authentication and no privacy.
Auth, NoPriv: Authentication and no privacy.
Auth, Priv: Authentication and privacy.

Read View Name The name of the MIB view defining the MIB objects for which this 

request may request the current values. The allowed string length is 1 
to 32, and the allowed content is the ASCII characters from 33 to 126.

Write View Name The name of the MIB view defining the MIB objects for which this 

request may potentially SET new values. The allowed string length is 1 
to 32, and the allowed content is the ASCII characters from 33 to 126.

Содержание CWGE24MS














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды